Kool Stop V2 Holder + Dual Compound Inserts

Key Features:

  • Rim friendly compounds
  • Multiple water displacement grooves
  • Patented plow tip
  • Curved aluminium holder
  • Integrated Pad-Lock hardware
  • Secure Lock Pin
  • Thicker pad for longer pad life
  • Offset post
  • Weight: ca. 44 g/pair
  • Overall length: 72.5 mm
  • Pad contact width: 8.5 mm
  • Made in the USA

Next generation V brake holder. Lighter than before in a lovely titanium colour.  Universal replacement pad for all V type systems. These pads are easy to fit

The special Dual compound inserts are for all weather types including wet and muddy as well as for summer days.

Installation Instructions:

  1. Clean the rim surface before installing new pads
  2. Place the new Kool Stop pads into the brake caliper arms and finger tighten the nuts
  3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
  4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
  5. Check the pad and rim alignment after the pads are broken in and after every ride
  6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair

MSRP: £23.00


Amba Distribution Limited
Powered by B2B Wave