Kool Stop MTB Cantilver Salmon

Key Features:

  • Hardened and plated reinforced steel backbone
  • Patented angled tip plows mud and rain off rims
  • Water grooves
  • Knurl-lock™ washer system
  • Rim friendly compounds
  • Designed for easy tyre removal for systems with tight brake clearance
  • Weight : ca. 38 g/pair
  • Length: 78 mm
  • Pad contact width: 8 mm
  • Made in the USA

The MTB Mountain Pad is a top choice for mountain bike direct pull brakes.  The curved design allows this longer more rigid pad to contour the rim for better brake performance. This is ideal for shallow rims and for easy tyre removal. The angled tip and plow make for easy toe in and clears rim debris in wet conditions.  Including a hardened and plated reinforced steel backbone. Featuring the Knurl lock washer system and rim friendly compounds

The Salmon compound is for wet and muddy conditions

Installation Instructions:

  1. Clean the rim surface before installing new pads
  2. Place the new Kool Stop pads into the brake caliper arms and finger tighten the nuts
  3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
  4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
  5. Check the pad and rim alignment after the pads are broken in and after every ride
  6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair

MSRP: £12.50


Amba Distribution Limited
Powered by B2B Wave