Kool Stop Thinline Threaded Dual Compound

Key Features

  • Low profile
  • Hardened and plated reinforced steel backbone
  • Patented angled tip plow 
  • Water grooves
  • Knurl-lock™ washer system
  • Self tow in
  • Weight: ca. 55 g/pair
  • Overall length: 72 mm
  • Pad contact width: 9 mm
  • Made in the USA

Designed for bikes with tight brake clearance such as touring bikes and some cyclo cross bikes. The Thinline allows for easier wheel removal without having to resort to letting the tyre down. This pad has a hardened rigid internal backbone that helps pack a lot of performance into a small space. Patented angled tip to plow mud and rain away from rims

The special dual compound is a great all weather option incorperating the Black compound for normal conditions and the Salmon compound for wet and muddy conditions

Installation Instructions:

  1. Clean the rim surface before installing new pads
  2. Place the new Kool Stop pads into the brake caliper arms and finger tighten the nuts
  3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
  4. Break In Pads. Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
  5. Check the pad and rim alignment after the pads are broken in and after every ride
  6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair

MSRP: £17.00


Amba Distribution Limited
Powered by B2B Wave