Kool-Stop Supra 2 Threaded E-Bike Compound Grey

Key Features:

• Weight: 56 g/pair
• Overall length: 66 mm
• Pad contact width: 9 mm 
• Knurl lock washer system
• Self tow in

The Supra 2 is one of the most popular pads from Kool-Stop. This rim friendly compound was designed especially for E-Bike with the special Power Stop design. Featuring a hardened and plated reinforced steel backbone, a patented angled tip plow and water grooves.  They can can be fitted with the original "pad-lock" gripper washer system to fit all types of brake systems

Installation Instructions:

1. Remove the keeper pin from the holder
2. Slide out the old pad from the holder
3. Insert the replacement pad so that the notch lines up with the keeper pin holes in the pad holder.
4. Replace the keeper pin
5. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
6. Check the pad and rim alignment after the pads are broken in and after every ride
7. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool-Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Supplied as a pair