Kool Stop Mafac Retro Inserts Black

Key Features:

  • Suitable for Campagnolo, Mafac and Weinmann replacement
  • Overall length: 46 mm
  • Pad contact width: 10 mm
  • Weight: ca. 17 gr/pair
  • Made in the USA

Retro styled replacement pads designed for vinatge Mafac competition and GT Racer brake shoe holders.   These pads will look 'period correct' on your brakes but will provide stopping power far superior to the standard inserts. Offering an exact fit no cutting will be required

The special Black compound is designed for use in dry conditions

Installation Instructions:

  1. Clean the rim surface before installing new pads
  2. Place the new Kool Stop pads into the brake caliper arms and finger tighten the nuts
  3. Squeeze brake lever to allow correct pad to rim alignment; tighten the nuts.  Do not over tighten
  4. Break In Pads.  Full stopping power may not develop until after several braking applications have conditioned the rim surface.  Proper "toe in" alignment prevents brake chatter
  5. Check the pad and rim alignment after the pads are broken in and after every ride
  6. Important: Do not ride the bike until the brakes are checked and functioning properly.  Designed for bicycle use only.  All Kool Stop Pads meet or exceed C.P.S.C and D.I.N bicycle standards

Two pairs supplied


MSRP: £28.00


Amba Distribution Limited
Powered by B2B Wave