Busch+Müller IQ-XL High Beam E 11V - 48V DC 300 Lux E-Bike Front Light

Available

Code

BMLE22

UPC

4006021013926

Barcode

4006021013926

Brand

SRP

£350.00

Minimum quantity

1

Description

Key Features:

  • 300 Lux
  • Suitable for 11 - 48 V DC supply
  • High beam mode 250 Lux, 16 Watt
  • Low beam mode: 300 Lux, 11 Watt
  • Pushing the handlebar button activates 250 Lux high beam light
  • Requires at least 16 W nominal output of the drive system's light connection
  • Extremely wide illumination
  • Aluminium housing
  • 65 cm switch cable
  • Not approved for speed E-Bikes
  • German mark of approval

For use with E-Bikes only ie NOT dynamo drive

300 Lux in low beam mode. going above and beyond all previous light output values by far. The extensive light field is wide, long and homogenous but as with any headlight approved for road use, its light/dark boundary is exact. With a push on the ergonomic handlebar button, all boundaries are gone: With 250 Lux, the high beam light shines even further and higher than ever before. Previously darkened areas are brightly lit and all obstacles can clearly be seen. 

Sensor controlled DRL ensures best visibility. High grade black powder coating on the aluminium casing as well as a newly designed mounting bracket make the IQ-XL a headlight designed for pedelec E-Bikes. The handlebar button shines green in low beam and blue in high beam mode. It can be mounted on all handlebars or combined with suitable Magura and Tektro brake levers to save space.

Please note the following recommendations from  Busch+Müller if you are planning to install your own E-Bike lighting system: 

  • Establish and/or measure the voltage on the cables or connecting point intended for the connection. Make sure this is within the parameters of the light specification
  • Establish and/or measure the polarity of the above mentioned connection and make sure to connect respectively to the correct pole using the instructions and/or the + / - signs on the light
  • If you are not able to establish either of the above, or are not sure then please refer to your local electric bike specialist to install the lights for you